If you thought my rubber and brass tube necklace was simple, this pendant is even more so!
The pieces come from the same batch of tubing offcuts in the previous post. This time  6 pieces of metal tube the same diameter and graduating lengths (approx 1″ and smaller)…
I played around with arranging them and settled on this staggered configuration…
Then grasping one of the tubes with a set of small pliers…I simply super glued each tube in turn along the length, holding in place for about 30 seconds before moving onto the next….(be sure to use a glue suitable for metal)
Leave to dry…
Thread onto a piece of leather, rubber, or your favourite chain!
Doesn’t get easier than that, right?!