It’s been all about the cozy around here. Temperatures as we know have been less than balmy and Shedquarters has been a little chilly to say the least. So an extra layer (or two) has been a prerequisite recently. Enter this oatmeal coloured “blah” fleece!
“Blah” because of the shape. But the fleece itself is super soft and has the appearance of felted wool….except way way softer! So I set about chopping it up….and this is what I ended up with!
A cute little cropped cardi/jacket with simple lines, that sits just on the hip at the front and dips down at the back. Couldn’t be simpler really. No raw edge finishing required as the fabric doesn’t fray. Just a few cut’s and minimal sewing. You can apply this to any similar fleece or sweatshirt. Here’s what I did…
Trimmed away the neckband close to the stitching and rounded off that V shape a little (optional)…
Cut straight up the middle to create the opening….
Cut a dipped/curved hem, removing the hem band in the process…
Cut the sleeves down to my preferred “bracelet” length, leaving a little extra for turning…
Turn and hem the cuffs and bottom hem…
Turn and stitch a narrow hem arround the neckline. This would normally be a no no but as this fabric had a degree of stretch (and I didn’t have any fabric left for a facing) I went with it and it worked fine 🙂
Then turn under and stitch either side of the opening….
In all instances stitch as close to the raw edge as poss. This will give you a super clean finish and as you can see, that rule breaking I did with turning rather than facing the neckline? Not a problem 😉 Still a nice clean corner there . You can also see a double row of stitching along the vertical edge of the opening. (Partly decorative. Partly functional)
And that’s that! It’s a perfect little extra layer to chuck on and much much less blah than the original! Even better, it takes about 30 mins. Gotta love fleece/sweatshirt fabric! More sweatshirt stuff coming up this week. Watch this space!